Excuses the inconveniences, to be able to see correctly the menu of navigation of the web is necessary the plugin of flash 6, you can discharge it here, many thanks.
Low Pressure Machine K.B.P
CHARACTERISTICS
<< volver
Works with different capacity moulds.- Produces high-quality pieces.
- Presses formed by two plates, mobile and fixed one.
- Rectified INA columns.
- Principal cylinder from withdrawn pressure form the heat area.
- Rigid and absolute parallelism between the fixed and mobile plate.
- Extracting arm to collect the manufactured piece of the mould.
- Arm position adjustable in height and speed.
- Possibility of incluiding other arm for the filter placement.
| K.B.P K.B.P. 1.400 | K.B.P K.B.P. 1.600 | |
|---|---|---|
| Diámetro de las columnas | 80mm | 100mm |
| Distancia entre columnas | 1400x800mm | 1600x1000mm |
| Dimensiones placa fija | 1750x920x120mm | 2000x1000x125mm |
| Dimensiones placa móvil | 1540x1000x80mm | 1800x1000x90mm |
| Fuerza de cierre | 12.000Kp | 30.000Kp |
| Fuerza de apertura | 10.000Kp | 26.500Kp |
| Distancia entre placa fija y móvil | 200mm 1400mm |
200mm 1600mm |
| Mínima | ||
| máxima |
Advantages of the use of you plot of low pressure:
-
Smaller worker men because the furnace operates automatically and doses on the machine.
-
Exact control of Tª that we wish to dose on the low.pressure furnace, as smaller consequence time of not production
-
Pieces production with top quality to not introduce oxides.
-
Not fall of metal Tª during the transport, avoiding to fuse the Al. to more Tª
-
Refractory life superior to 10 years.
-
Greater productivity.
-
Greater metal quality.
-
Smaller costs of development.
-
Ambient of sure work.
